Gas economizers for the prevention of the unproductive gas consumption in breaks of work

Gas economizers for the prevention of the unproductive gas consumption in breaks of work

Art. 5940-W / Art. 5960

Gas economisers are used to avoid any unproductive gas consumption in work intervals. In most cases the investment pays off within a short period, especially with fixed welding installations and in the production of small series.

The particular advantages of gas economisers

  • Cost-effectiveness: Fuel gas and oxygen are only consumed during the actual welding job
  • Economy of time:The flame needs no readjustment after work intervals
  • Safety: The torch is correctly and safely parked during work intervals (safety support in conformity with the regulation of the German Professional Association for Safety).

Funktionsweise:
Der Gassparer besteht aus einem Ventilblock (1) mit Brenngas- und Sauerstoff-Zu- (2) und Ableitungen (3), einer Pilotflamme (5) und einem Sicherheitsbügel (4) zur Brenneraufnahme. Beim Einhängen des Brenners in die Brenneraufnahme werden die Gasezuleitungen geschlossen und der Brenner erlischt. Bei Entnahme des Brenners wird der Brenngas- und Sauerstoff-Durchfluss wieder unverändert geöffnet, so dass der Brenner ohne erneute Flammeneinstellung an der Pilotflamme gezündet werden kann (der Gasverbrauch der Pilotflamme ist dabei minim).

Gassparer sind vor allem zur Montage am Arbeitsplatz geeignet; sie sind jedoch auch freistehend auf Ständer montiert lieferbar.

Mode of operation:
The gas economiser includes a valve block (1) with fuel gas and oxygen supply in- (2) and outlets (3), a pilot flame (5) and a safety support (4) for the parking of the torch. Hanging the torch on the support shuts off the gas supply and the flame extinguishes. When the torch is lifted, the fuel gas and the oxygen supply are re-opened with unchanged flow, so that the torch can be re-ignited by touching the pilot flame without readjustment of the gas-mixture (the consumption of the pilot flame is minimal).

Gas economisers are especially suitable for installation at the work place; they are also available for installation on free-standing stands.

Order numbers:
gas economiser for acetylene-oxygen / hydrogen-oxygen Art. 5940-A
gas economiser for propane-oxygen / natural gas-oxygen Art. 5940-P
gas economiser with angle outlet of hoses Art. 5940-A/W, resp.
Art. 5940-P/W stand for gas economiser Art. 5960